|
The Husky Industrial Ethernet Switch is a cost effective industrially
hardened Ethernet switch specifically designed to operate reliably in
electrically harsh, demanding environments and in hazardous locations.
The switch provides a high level of immunity to electromagnetic interference
and power supply surges typically found in industrial plant environments.
The unmanaged HUE-411 and HUE-413 series comes with your selection of either
a Multimode or a single mode fiber port. In order to meet redundancy requirement
in an industrial device, HUE-411 and HUE-413 series is equipped with redundant
power inputs and failure alarm by relay output.
Key Features:
Hardware Features:
- Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3X
- CSMA/CD Protocol
- RJ-45 Port support auto MDI/MDI-X function
- Wide-range redundant power design
- Store and forward switch architecture
- DIN rail and 3-way wall mount design
Industrial Conformance:
- 12 to 48V DC, redundant power with polarity reverse protection and
terminal block for master and slave power
- -10 to 70 Degrees C operation temperature
- E version -40 to 80 Degrees C operation temperature
- IP-30 standard Aluminum case
- EMI complies with FCC Class A, CE EN6100-4-2, CE EN6100-4-3, CE
EN6100-4-4, CE EN6100-4-5 and CE EN6100-4-6
- Stability testing with IEC60068-2-32(Free fall), IEC60068-2-27(Shock) and
IEC60068-2-6 (Vibration)
| Summary: |
- 4 TX ( RJ45 ) ports 10/100
- 1 FX multimode ( 2km ) fiber port with SC connector
- Supports Full/Half Duplex, auto-negotiation, MDI/MDI-X on TX ports
- Alarm relay output for port loss, loss of power
- Redundant power inputs 12-48 VDC
|
- Rigid aluminum case – IP31
- DIN rail mountable
- Panel mountable – bracket furnished
- Temperature rating of -10 C to + 70 C
- UL, ULc, CE, FCC approvals
- MTBF 315,000 + hours
- 5 year global warranty
|
|
