|
The PG series Cord Grips are a low cost, highly configurable solution for creating a watertight seal around one or more cables of varying sizes. The cord grip can be drilled for multiple configurations depending on how many cables are utilized.
The unique feature about this product is the split insert. The split insert eliminates the need to remove connectors from cables during installation, facilitating the use of premade cables.
The limiting factor then becomes the cord grip ID versus the width of the connector assembly on the prefabricated cable. The PG36 cord grip can accommodate a 36mm connector (for example, a DB-9 or HD-15 connector).
The PG series cord grip is offered in Polyamide, Nickel Plated Brass, or 316 Stainless Steel.
This product meets IP65 standards and is NEMA13 compliant.
Product Highlights:
- No need to remove and reinstall connectors from cables for installation
- Creates a liquid tight seal around cables
- Meets IP65 standards and is NEMA 13 compliant
- Body available in Polyamide, Nickel Plated Brass or 316 Stainless Steel
- Cable gland insert available in PVC or Santoprene (for higher temperature)
- Sealing washer available in polyethylene, Viton, BUNA-N, or silicone
|
 |
Click to enlarge |
Product Dimensions:
* Note: Dimensions are for Polyamide Body, External Dimensions of Nickel Plated Brass and Stainless Steel Cord Grips are somewhat smaller.
 |
|
Cord Grip Dimensions: mm (in)
|
|
Part
|
A
|
B
|
C
|
D
|
E
|
F
|
G
|
|
PG16-BA
|
32.5(1.28)
|
23.0(.91)
|
9.5(.37)
|
22.5(.89)
|
27.0(1.07)
|
29.5(1.16)
|
16(.63)
|
|
PG29-BA
|
45.5(1.79)
|
34.0(1.34)
|
11.5(.45)
|
37.0(1.46)
|
43(1.69)
|
46(1.81)
|
28(1.1)
|
|
PG36-BA
|
48.0(1.89)
|
34.0(1.34)
|
14.0(.55)
|
47.0(1.85)
|
53(2.11)
|
57(2.24)
|
37(1.47)
|
|
